Skip to main content

The headlights on my 2006 Ford Focus are getting "foggy," to the point where the light emitted is greatly reduced. I have tried an aftermarket headlight cleaner from Canadian Tire that works in polishing/ buffing out the foggy portions. In fact, afterwards the headlights look close to new. However, this only lasts about a month before the problem returns. Other than replacing both of my headlight units, do you have any suggestions that might improve it? I am currently just repeating the process monthly. – Peter in Oakville, Ont.

As you are well aware, plastic and even glass lenses dull after continued exposure to flying particles and the nasty stuff in the atmosphere.

This is especially true with plastic lenses. When the industry switched from the mandated round or rectangular glass headlights decades ago, it allowed car designers the freedom to include headlights in their work. This quickly led to a vast variety of sizes and shapes, easily done with plastic that can be moulded to almost any shape. The lenses can be almost any imaginable shape but the hardware behind them is pretty uniform.

Story continues below advertisement

The plastic lenses have a thin layer of protectant film on them when installed, but this is worn away over time by the constant bombardment from small particles thrown into them by vehicles ahead. Anyone who travels regularly on gravel roads or roads where salt or sand is used in winter knows the damage that can be caused to windshields, the leading edge of the hood, side mirrors, headlights and other areas exposed to this bombardment.

The weakest of all these are headlights – partially because they stick out further and are lower, but mostly because they are "softer" than the other surfaces made of metal and glass.

There are numerous kits available that allow you to restore the surface of these plastic lenses to a like-new condition. But how long they stay that way depends on whether the system used includes a final step – the application of a protectant layer, something that will deflect damaging materials and effects of UV rays, yet not influence the passage of light through the lens.

One of the Sylvania kits has such a synthetic final film as does the 3M Lens Protectant Kit with Protection. You can also apply a thin plastic film like those used to protect the surface of cellphone and PDA screens such as that available from a company called XPel.

A coat of wax, applied frequently, might help, as will adding a car length to the following distance on roads and in conditions where vehicles ahead are throwing up a cloud of dust and debris.

globedrive@globeandmail.com

Report an error Editorial code of conduct
Due to technical reasons, we have temporarily removed commenting from our articles. We hope to have this fixed soon. Thank you for your patience. If you are looking to give feedback on our new site, please send it along to feedback@globeandmail.com. If you want to write a letter to the editor, please forward to letters@globeandmail.com.

Welcome to The Globe and Mail’s comment community. This is a space where subscribers can engage with each other and Globe staff. Non-subscribers can read and sort comments but will not be able to engage with them in any way. Click here to subscribe.

If you would like to write a letter to the editor, please forward it to letters@globeandmail.com. Readers can also interact with The Globe on Facebook and Twitter .

Welcome to The Globe and Mail’s comment community. This is a space where subscribers can engage with each other and Globe staff. Non-subscribers can read and sort comments but will not be able to engage with them in any way. Click here to subscribe.

If you would like to write a letter to the editor, please forward it to letters@globeandmail.com. Readers can also interact with The Globe on Facebook and Twitter .

Welcome to The Globe and Mail’s comment community. This is a space where subscribers can engage with each other and Globe staff.

We aim to create a safe and valuable space for discussion and debate. That means:

  • Treat others as you wish to be treated
  • Criticize ideas, not people
  • Stay on topic
  • Avoid the use of toxic and offensive language
  • Flag bad behaviour

Comments that violate our community guidelines will be removed.

Read our community guidelines here

Discussion loading ...

Cannabis pro newsletter